Specification
Features
1. Large capacity
One single-silo capacity is up to 17,000 tons with comprehensive configurations to meet customers’ different requirements.
2. High accuracy
Complete advanced processing equipment and technology are introduced from USA to effectively ensure working accuracy and reduce damage to galvanized layer.
3. Less residues
External installable stiffeners contribute to less grain residues on silo walls.
4. Detachable and movable
With standardized and modularized production, components and parts have a high standardization and good interchangeability, thus can be partially replaced or completely transferred.
2 Steel Silo Machine Working Condition
2.1
2.1.1 Operation area:20X 5.0 X 8(length X width X height)m
2.1.2 The direction of feeding: from left to right
2.1.3 Power: 380V, 50Hz, 3 parch
2.1.4 Total Power:about 265kw
2.2 Main technical data
2.2.1 Width of material sheet:1145 mm
2.2.2 Thickness of material sheet:3~7mm
2.2.3 Low carbon steel,galvanized sheet,cold steel,etc
2.2.4 Working piece length:≤6000 mm
Steel Silo Roll Forming Machine Production Craft
2.3 Main Machine Technical Parameters
2.3.1 10T hydraulic decoiler
Steel coil width----from 1250 mm to 1500 mm
Internal diameter of coil----variable, from 470 mm to 620 mm
Coil placement in the coil holder----hydraulic hoist
Maximum coil weight----10000 Kg
Working speed----0-15m/min adjustable
Maximal out diameter----1600mm
Main motor power----7.5KW AC motor
Hydraulic power----5.5kw
Forming Section
Material of the profile ---- 195-235Mpa GI or carbon steel
Thickness range ----3.0-4.0mm
Main motor power ----60kw, AC motor, motor inside of main machine
Roll station ----20stations (according the final design
Shaft diameter ----￠150mm
Machine roll forming speed---- not less than 18 meters per minute
Auto stacker and transmission table
Take the sheet by air compressor, 5.5KW( provide by customer)
Air cylinder swing arm size----40mmx80mm
Transmission power----4kw AC motor
Stacker length in 12m, transmission table length in 25m
Drive of transmissionby 1.0inch double line chain
Transmission roller----ASTM1045 with chrome, diameter of roller is in 80mm
Carrying capacity----maximal 5000Kg
Length of capacity ----500-12000mm
The maximal stacker height---- 300mm
3 Station Curving Machine
Thickness----3-4mm
Maximal feeding---- width1000mm
Roll speed====0—10m/min
Main power====30KW
Roll station===3 stations
Shaft material===45# forge steel, polished and coated with chrome
Diameter of shaft ===180mm
Material of roller===Gcr15 steel, polished and with HRC58-62°
Adjust angle motor power===3KW
Dimension of machine===2000 mm×1200 mm×1300 mm
Curving mode===horizontal
Curving diameter≥800mm
Steel Silo
Product Tags:
|
|
Effluent Storage Steel Silo Roll Forming Machine , GCR12 Metal Rolling Machine Images
|
